Model Number

SYD-6536

Product Description
The instrument is designed and made as per the National Standard of People’s Republic of China GB/T6536 “Test Methods for Distillation Characteristics of Petroleum Products”.

Product Specification/Models
1. Main technical parameters
(1) Power supply: AC 220 V±10%, 50 Hz
(2) Heating power: 1000 W
(3) Ambient temperature: room temperature～+35 ℃
(4) Relative humidity: ≤85%
2. Main characteristics
(1) The furnace is composed by silicon carbonized pedestal, heating wire of 1000 W, 220V and high temperature resistant silicon carbonized plate. The height of the furnace can be adjusted by the height adjust knob, and the heating power of the furnace is controlled by the voltage adjust knob on the control panel.
(2) The movable plates of furnace is made by silicon carbonized materials. The diameter of hole in the plates is Φ38 orΦ50.
(3) The water bath is composed of overflow tube, temperature adjust tube and bath. The size of the bath is 244×167×176 mm. The bath is made by copper plate H62 of 1.5 mm thickness.
(4) The furnace case is made by cold rolling steel. There is a observation window at the upper section in the front of the furnace case. The furnace case is used for installing furnace and distillation flask. There is a circuit controlling section at the lower section of the furnace case.
(5) The distillation flask is made by harden glass. The outer diameter of the ball section is Φ69±1, and the inner diameter of the flask neck is Φ17±1. The angle between the branch tube and the neck of flask is 75±3 °.
(6) The condensation tube is made by copper tube of Φ14×1. The outlet of the tube is arc, and the length of the tube is 560±2 mm.
(7) The graduated flask is 100 mL and the graduation is 1 mL.
(8) The thermometers are total immersion type. The measurement ranges are -2～+300 ℃ and -2～+400 ℃ respectively, and the graduations of them are both 1 ℃.

Application
It is suitable to determine the distillation characteristics of gasoline, aviation gasoline, jet fuels, and solvent having special boiling point, naphtha, diesel oil, distillate fuels and similar petroleum products. It is also suitable to determine the distillation characteristics of petroleum products as per ISO3405, ASTM D86 and IP123.